Briquetting machine for pressing the aluminum/ copper chips

Metal chips briquetting press machine is suitable for aluminum alloy profile factory, steel casting factory, aluminum casting factory, copper casting factory.

This hydraulic briquetting press can directly cold-press powdered cast iron scraps, steel scraps, copper scraps, aluminum scraps, etc. into cylindrical cakes of 3 to 6 kg, so as to facilitate transportation, throwing into the furnace, and the whole process does not require heating, additives, or other craft.

Metal chips briquetting press machine is suitable for aluminum alloy profile factory, steel casting factory, aluminum casting factory, copper casting factory.

Alligator shear is also called alligator shearing machine, which is very widely used in the metal recycling industry.Alligator shear is a samll machine with high speed to cut the waste metal.

Car baler machine is specially designed for recycling the car body or car shell, the scrap car after removing the tires, the motors ect with a large volume which is difficult to stack and transport to the recycling centre. This car baler can press the car body into a small bale, this can reduce the cost of transport and place of stock.

Shredder machine is used for coarse shredding to cutting the unprocessed raw materials or scraps to make them smaller in size. Compared with other crushers, the cutter shaft of shredder machine has lower speed, less noise and lower energy consumption.

Metal scrap baler machine recycling Here are four different of the metal baling machine's bale pushed out ways, bale side push out, front push out, turn out and the manual: And the scrap metal baler can be operated fully automatic or manually handle. Scrap metal baling is an essential process in the metal recycling industry, the machines use hydraulics to operate the pressing mechanic that crushes the scrap metal into bales.

Teyun extrusion is the manufacturer of aluminum extrusion press and the cooper extrusion machine, we has specilized in this industry for over 30 years. The aluminum/cooper extrusion press machine is the most equipment of the whole aluminum/cooper  extrusion line, which is used for producing the aluminum profiles, the aluminum wire, the cooper tube and ect. If you are interested in, we can offer you the full plan of the aluminum/cooper extrusion press line.