Teyun heavy duty hydraulic scrap metal baler has the 500ton, 630ton, 800ton,1000ton and even the 2000ton types. This scrap metal baler is usually used to press the scrpa metal to save the transport cost and space which is very popolar in the recycling industry.
For the balers we have many types: the scrap metal baler, the vertical baler and the horizontal baler.
The hydraulic scrap metal baler (also called as the scrap metal baling machine) is a machine used to compress or crush different types of metal scraps into a compact and manageable form. It is a significant tool in the recycling industry, as it helps to reduce the volume of waste metal materials, thus making it easier to store, transport, and recycle. Teyun is the direct manufacturer of the hydraulic scrap metal baler for many years and has sold the balers to many countries.
Features of the hydraulic scrap metal baler
1. High compressive force: A hydrulic scrap metal baler carries a high compressive force that can compact large metal volumes into small and manageable sizes.
2. Easy operation: It is easy to operate, and the entire process takes a short time to complete.
3. Safety features: It comes with various safety features, including emergency stop buttons and sensors that prevent any unexpected accidents.
4. Different sizes and models: There are different sizes and models available to accommodate various types of metal scrap and operation requirements.
5. Durability: A scrap metal baler is built with sturdy materials that are designed to withstand the harsh working conditions of the recycling industry.
6. Low maintenance: Maintenance is usually minimal, reducing the cost of operation.
7. Environmental friendly: It promotes a cleaner and healthier environment by reducing the amount of waste metal materials that are in circulation.
The scrap metal baler is widely used in the recycling industry, the machine baling the scrap metal like aluminum, cooper,steel and so on into a bale which is easy to transport and save the stock space.
The scrap metal baler is widely used in the recycling industry, using this machine can bale the waste metal into a baler, this process can save the transport cost and space.
This kind of scrap metal baler machine is especially designed for baling the waste metal which can bale the loose waste metal into a baler to reduce the cost of the transport.
Metal scrap baler machine recycling Here are four different of the metal baling machine's bale pushed out ways, bale side push out, front push out, turn out and the manual: And the scrap metal baler can be operated fully automatic or manually handle. Scrap metal baling is an essential process in the metal recycling industry, the machines use hydraulics to operate the pressing mechanic that crushes the scrap metal into bales.
Q15 Sheet metal shearing machine is smaller than the Q91 scrap metal shearing machine. The Q15 sheet metal cuuting machine is used for shearing the non-ferrous metals, plate, copper and so on in the metal recycling process.
Teyun extrusion is the manufacturer of aluminum extrusion press and the cooper extrusion machine, we has specilized in this industry for over 30 years. The aluminum/cooper extrusion press machine is the most equipment of the whole aluminum/cooper extrusion line, which is used for producing the aluminum profiles, the aluminum wire, the cooper tube and ect. If you are interested in, we can offer you the full plan of the aluminum/cooper extrusion press line.
français
русский
español
العربية
日本語
Tiếng Việt
中文
Address : Mingjue Industry Park, Lishui District, Nanjing City, Jiangsu Province
IPv6 network supported