Successful testing of the gantry shear and horizontal baler!

Before delivery the machines to customers, Teyun will test and make the trial running in the factory to make sure the machines are in good quality and can run in good condition. Also Teyun will take vidoes of these testing and share them the with the operation vidoes, this makes the customers are very satified with Teyun before receiving the goods. Today Teyun tests two machines, one is the 160T horizontal baler and another one is the 800T gantry shear.

Test one: 160T fully automatic horizontal baler with conveyor

This 160T horizontal baler is fully automatic with automatic strapping function is customized for the Saudi Arabia client. The client wants this baler for baling and recycling the waste cardboard. So Teyun bought the waste cardboard from the recycling centre to test baling the cardboard. During the test, we test the conveyor feeding function, the strapping function, baling function and ect. The out put of the cardboard bale is very tight and nice, also we shared all the vidoes for the client for reference who is verysatified with our baler and service. To be noticed for this cardboard baler, here are three light points we especially customized for this client: 1. Long conveyor belt(tell us your requirments we can customized the conveyor belt width and length);  2.Automatic strapping function(save the labor cost and time, also we have the semi-auto baler without the strapping function);  3. Cooling system: considering the high temperature of Saudi Arabia, we choose the ac chiller for the cooling system not the normal water cooling to increase the cooling speed and cooling effect.

Test two: 800T heavy duty gantry shear 

This 800T heavy duty gantry shear is for our Indonesia customer who owns a big metal recycling centre. This 800T gantry shear with high production can cut the scrap metal for 12-16ton in one hour. To test this 800T gantry shear, we prepared many waste metal like waste steel pipe, metal bales, alloy iron and so one to feed them into the feeding box. For the gantry shear testing, we mainly focus the following points: 1.Cover open and close functions 

2. Scrap metal cylinder pushing function 

3. Metal cutting function

4. Side cylinders press function.

During the testing process, this 800T gantry shearing machine can very easily cut the scrap metal into the piese and can cut two bales at the same time.