Precautions for Metal Baler During Test Run

Metal balers have always been one of Teyun’s popular recycling machines.Customers need to pay attention to the following points after receiving and testing the metal baler.

1. You need to check whether the power supply and electrical connections of the equipment are normal. Make sure that the power plug is firmly connected to the power outlet and that there are no loose or broken wires. Before turning on the equipment, make sure that the fuses and circuit breakers in the distribution box match and are in proper working condition. This can avoid electrical faults and safety accidents.

2. You should check whether the mechanical parts of the metal baler are intact.

Observe all parts of the baler, including the compression device, cutting device and transmission system, to see if there is any looseness, foreign matter or damage. If any abnormality is found, the damaged parts should be repaired or replaced in time to ensure the normal operation of the equipment and the safety of use.

3. You also need to set the parameters of the metal baler correctly. According to the size, weight and packaging requirements of the metal products, adjust the parameters of the baler such as pressure, speed and time. Ensure that the parameters are set correctly to avoid the occurrence of poor or damaged packaging. 

4. When testing the machine, you need to pay attention to the safety of the operator. Before operating the metal baler, the staff should wear safety protective gear, such as gloves, goggles and earplugs. Avoid placing hands or other body parts near moving parts to avoid injury. At the same time, operate the machine in strict accordance with the equipment operating procedures and follow the instructions for use provided by the equipment manufacturer.

5. During the trial process, you need to closely observe the operation of the metal baler. Ensure that the equipment runs smoothly and has no abnormal sound or vibration. If abnormalities occur, stop the machine immediately for inspection and take appropriate maintenance measures as needed.