Five reasons for you to choose the TEYUN briquette press!

Hydraulic briquetting machine is a kind briquetting machine with much high pressure and mostly used to compact the waste metal chips/powder like the aluminum/steel chips, copper powder and ects into a bale. This process reduces mcuh shipping cost and stock place, also can make a big profit from it. So the briquetting press is widely used in the metal recycling industry.

Material Requirement:

Metal: aluminium, brass, copper, steel, magnesium, cast iron, stainless steel, lead, sponge iron, etc.

Less than 40 mm. Of course, the smaller, the better, small materials will help to make a high density and high quality briquette.

No requirement on moisture.

Here we have five reasons to introduce to you, why you should choose Teyun briquette press machine.

  1.  Save space

The highly compacted briquettes help to save much space for you, take iron as an example, the bulk iron powder density are following: cast iron scrap 2.7 g/ cm³, compare to the raw iron scrap, the density of the final briquette can be around 5-6 g/cm³ . You can can improve your bottom line by reducing storage and handling costs and increasing income at the same time.

  2.  Easy mold out

For which allowed you to make your customized pattern on the briquette.

  3. High purity for metal scrap briquette

The machine is hydraulically powered, compresses your metals with no other materials like binders, so the quality and purity of the metal are maintained. This maximizes the value of the material.

 4. PLC control system

The PLC system leads an automatic way for you on briquette making process: feeding, lump discharging. Also you can choose the manual mode in case of a non continuous feeding.

  5. Easy customize

Customized accessories are available including valve, oil pump, . in order to meet the requirements of the specific needs. and the cooling system (air or water)also can be adjusted regards to the working environment temperature.